Electrical Installation Condition Report By London Property Inspection

The Report Of The Electrical Installation
 The model and method for producing the condition of the interior electrical installation of buildings for residential use.
The condition report is divided into two distinct parts:
- The classic administrative elements relating to the coordinates of goods and people

1:Designation of the building (s)
2:Client identification
3:Operator identification

- Technical information and recommendations
The installation concerns only the entire low-voltage indoor electrical installation of premises for residential use located downstream of the general control and protection system for this installation. It does not concern equipment for removable use, nor the internal circuits of equipment for fixed use, intended to be connected to the fixed electrical installation, nor installations for producing electrical energy from the generator to the point of injection into the network. public power distribution or connection point to the indoor installation.
The intervention of the diagnostic operator only concerns the visible and visit able components of the installation at the time of the diagnosis. It is carried out without moving furniture or dismantling the electrical installation (apart from dismantling the covers of the electrical panels if possible) or destroying the cable insulators: the dangerous elements of the interior electrical installation may not be identified, in particular:

The parts of the status report of the electrical installation condition that are not visible (incorporated in the main structure or the second structure or hidden by furniture) or requiring disassembly or deterioration to be able to access it (connection boxes, conduits , baseboards, trunking, frames, heating elements incorporated in the masonry, pool lights in particular);
The non-visible or non-accessible parts of the electrical panels after removing their cover;
Mismatch between the nominal current (nominal) of the over current protection devices and the cross-section of the conductors over the entire length of the circuits.